EXTRUDING WARY PLASTICS PLATES

Brief introduction Production Line：
　　 With SJ-BLB 1000 Taper Twin-Screw Extruder combined with corresponding wavy plate molder, drawing auxiliary machine and cutter, SJLB-60×22-1000 set for extruding wavy plastics plates can continuously produce the colored, weather-resistant and flame-retardant wavy UPVC plate used in the construction. If replacing the relative pare, it can also produce flat and grid plastics plates. The set has the characteristics of good plasticizing, stable performance, compact structure, high automatic degree and convenient operation, is the ideal productive equipment for construction manufacturers.
Main Technical parameters：
Type of Main Macine:SJSZ-60×22
Die form: coat hanger plane dieL=1000mm
Great Wave: R=15 h=16.5 峰距：63mm
Little Wave:R=9 h=8 峰距：36mm
Length of Molding Roll:1000mm
Motor Power:1.5kw(frequency-changing regulation)
Dimension of Cooling Mode:1000mm×540mm
Cooling Mode: Cooling Water
Dimension of Cooling Mode:1000mm×540mm
Cooling Mode: Cooling Water
Drawing Power:2.2kw(frequency-changing regulation)
Cutting Mode: shearing (oil pressure)
Cutting Follower Distance:500mm
Working Pressure of Gas Line:0.4-0.6Mpa